In all sources, the manufacturer of the WonderVapeco 270 KIT is CIGPET. Most likely, this is either a subsidiary or one of the partners of a large Chinese manufacturer.

The WonderVapeco 270 KIT comes in a fairly large cardboard box with an orange lid. On the front side, in addition to the name, there is a schematic image of the device itself and a strange warning, like on cigarette packs, that the product may contain nicotine, and this substance can be addictive. 

What’s in the box

Also in the box you can find an unfilled warranty card, multiple instructions, an IJOY 20700 battery in a personal package, a set of additional materials, a small Phillips screwdriver and an adapter for a battery from 18650 to 20700

In addition to the vague and inconvenient black Phillips screwdriver, there is a set of originals, two screws, two claptons and two small pieces of cotton, already prepared for installation in the dripper. coil master rebuild kit Although they could have put at least 4 screws and a larger piece of cotton.

iJOY 20700 3000mAh 40A battery

The 20700 battery format is still exotic for use in vape devices, and it is very nice that one of them is included. The battery is branded IJOY and is packed in personal packaging. The real manufacturer of this battery is unknown and even from the summary tables from Mooch it is not clear who actually made it. However, the characteristics are quite good: 3000 mAh capacity and 40A current output.

The information on the battery itself is quite comprehensive: name, size, maximum output current of 40A, capacity in milliamps (3000) and in Watt-hours (11.1). Important warnings are indicated. Additionally, all this information is duplicated on the individual cardboard packaging.

Dimensions and features of WonderVapeco RDA

Outer diameter 24 mm

Height without drip tip 26 mm

Height with drip tip 33 mm

Blowing Bottom constant, side adjustable

Bottom blowing 4 holes with a diameter of 3 mm

Side blowing 1 or 2 holes 8 * 2 mm

Depth of the bath 8 mm

Holes for installing coils 2 * 3 mm

Overview of the Wonder Vapeco 270 KIT – connectors

On the bottom of the RDA is written the name of the device, who developed it, the certificate sign, the sign prohibiting household disposal. In addition, at the bottom you can see the screw for fastening the negative post and a 510 connector without the ability to adjust the positive pin. An attempt to unscrew the gold-plated screw leads to the positive post falling out. However, the positive pin protrudes by 1.5 millimeters and, in principle, does not need adjustment.

The base of the dripper is made of steel and painted black on the outside. At the bottom, there are two air intake holes for bottom blowing, and two o-rings are located slightly above. The stiffness of the o-rings and their sizes are very mediocre, disassembling the dripper without screwing it onto the device can be problematic.

Impressions

What I liked

Convenient installation of coils

Large holes for the coils themselves

Powerful screws

Large variability in blowing

Huge tray for liquid

What is simply good

Stylish appearance

Spherical processing of the evaporation chamber

Rectangular posts

Ability to work with one coil

Nice drip tip

What could be better

You can’t completely block the lower blowing

You can’t block the lower blowing for one coil

It is difficult to adjust the side blowing without disassembling the device

Tight O-rings (it is very difficult to remove the chamber without installing the base in the mod)

Little steam and at the same time little taste