Vaping has long ceased to be something surprising or special, as more and more ex-smokers become vapers. But among vapers (especially among those with experience) for many years now there is a debate as to which puff is better and tastier than a cigarette or a hookah puff. And the lovers of tight MTL puffs are constantly in search of original and (this is important) compact devices. Just for them, one of the most famous companies Vaporesso released quite an interesting starter kit Gen Fit Kit, analogues which can be found a lot, but not without a number of chips that make it practical and easy to use.

Overall impressions

Vaporesso Gen Fit Kit is a compact starter kit that consists of a box mod Gen Fit, running the chip Axon, and atomizer iTank M, designed for interchangeable vaporizers MTX series. The box mod is initially made miniaturized, so it has good ergonomics and can be successfully used as a stealth device. The built-in powerful battery and Axon chipset will allow the vaper to get good autonomy and maximum power up to 20 watts. The tank iTank M is not designed for large volume of liquid, but originally designed for a tight cigarette puff. The atomizer works with interchangeable vaporizers MTX series resistance 0,8/1,2/1,4 Ohm. The Vaporesso Gen Fit Kit is available in six colors Black, Gray, Blue, Gold, Pink and Blue.

Kit

As unfortunate as it may be to say, the manufacturers are paying less and less attention to the box plushkamv, namely the kit, which for many vapers is very important. Therefore, in the box the vaper will find:

GEN Fit Box Mod;

Atomizer iTank M Tank;

MTX2 “Omega vaporizer; Coil;

Type-C USB cable;

Warranty card;

User Manual.

GEN Fit Box Mod

Even at a time when more and more vapers are switching to PODs and sub-mods, quite a few users prefer traditional box mods and tanks. And MTL lovers make up the bulk of them, because the devices of this format allow to get the tightest cigarette puff. Vaporesso company though regularly releases newfangled devices, does not forget the vapers of old school, so especially for them was released starter kit Vaporesso Gen Fit Kit.

Vaporesso Gen Fit Mod box mod immediately attracts attention with its neat and stylish design, as it is made in the form of an ellipse in section, without sharp edges and corners. The case is made in the style of minimalism, which is what bribes the device, as you can safely say about it simply and tastefully. The mod (together with the tank) has quite modest dimensions 122,1*27,6*19,1 mm. The device is equipped with a standard 510 connector and is designed to install tanks with a diameter of up to 18.5 mm, so the vaper can use not only the complete tank, but also its analogues.

Vaporesso Gen Fit Mod has a built-in 1200 mAh battery, which is quite good for such a compact device. The battery is charged using the USB Type-C connector on the bottom end of the device with 1A current.

Despite the fact that Vaporesso Gen Fit Mod is quite a simple device, it runs under the control of the well-known Axon chipset, which is already well known to vapers. The chipset allows the vaper to get the power of 5-20 watts in three power modes, which are set very simply by pressing the fire button three times.

In order to control the battery level, on the top end of the device there is a rather large LED. It is interesting that Vaporesso Gen Fit Mod although it belongs to the box mods, but the manufacturer has provided two modes of activation by puffing and pressing a single fire button.

iTank M Tank atomizer

It is quite natural and logical that Vaporesso developed specially for this starter kit and iTank M Tank. The tank has 18.3 mm diameter, traditional 510 neck and 510 drip tip.

The iTank M Tank is designed to use MTX series vaporizers, which were already presented by the company earlier. So far, the company has presented three variants of vaporizers with 0.8/1.2/1.4 ohms resistance.

Vaporesso Gen Fit Kit is initially positioned as an MTL device, so the tank is equipped with an adjustable bottom airflow. For air intake there are holes of different diameters, which are opened by a fine knurled adjusting ring. To refill the tank, you just unscrew the top cap and pour 3 ml of liquid into the two holes, and you can use both salt and freebase nicotine liquids.

Conclusions and impressions

The Vaporesso Gen Fit Kit is a real find for vapers who want a compact, stylish and practical kit at the same time. It is specifically designed for vapers who love tight puffs because the developers did everything they could to make it just that.

Advantages and disadvantages

Disadvantages

Non-standard size of the landing pad not all tanks can be installed;

Not very convenient to keep track of the current power.

Advantages

Compact size;

Stylish design;

The original design;

High capacity battery;

Fast charging;

510th drip-tip;

High-performance chipset;

Three power modes;

Two activation options;

Adjustable point blow.