It’s hard to argue that POD-systems are gradually replacing the usual tanks, drips, mechmods and side-mods. It is hard to answer exactly why, either because many vapers switch to the salt nicotine-based liquids, or because not everyone wants to carry a rather cumbersome box-mod with an atomizer. At the same time, felt-tip pens and thermometers made in miniature size have become very popular. An important point that still stops many vapers from buying is the need to replace the cartridge completely after a certain period of use. But manufacturers began to release POD systems not only with the ability to replace the vaporizer, but also with serviced bases, thanks to which the vaper can decide which coil will be used. Vapefly has presented its version of the Jester Rebuildable POD system, which will pleasantly surprise many people. It is worth saying right away that this system is presented in two variants with the same battery pack, but with different cartridges for using interchangeable vaporizers and with a serviced RBA base, so the vaper is given a choice.
General Data
Vapefly Jester Rebuildable Pod system is a mid size POD system that has a large battery and allows you to use two types of cartridges with interchangeable vaporizers or RBA base, so the vaper gets a good flavor experience. The device is made in a fairly familiar form factor, which has already proved itself in a positive way, as it is ergonomic and practical. The device has the ability to select the voltage applied to the vaporizer or coil, and the voltage parameters do not change depending on the battery charge level. The ability to choose one of the two types of cartridges allows the canadian vape shop to independently determine what he likes more interchangeable vaporizers or independent installation of spirals. Vapefly Jester Rebuildable Pod system is available in original colors, which is important for vapers who want to get the original device in black, silver, Ghost, Jester, Joker and Skull.
Kit
Given that the device is offered in two versions with different cartridges, its Kit also changes. That’s why the vaper is waiting:
Jester Pod Meshed edition:
Jester mod battery pack
Replacement cartridge with pre-installed 1.2 ohm vaporizer;
Replacement mesh coil cartridge 5 ohm;
USB charging cable;
User’s Manual.
Jester Pod DIY edition:
Jester mod battery pack
Replacement cartridge for vaporizers;
5 Ohm mesh coil vaporizer;
Replaceable maintenance cartridge;
Two prewound coils;
Cotton;
Replacement screws;
Screwdriver;
USB charging cable;
User’s Manual.
Jester mod battery pack
If we talk about the form factor of the Vapefly Jester Rebuildable Pod system, it will seem quite familiar to many vapers, because devices in this design have been repeatedly presented by manufacturers. The fact that this form factor is chosen is not surprising, because it is a win-win option in terms of dimensions, ergonomics and usability.
Separate attention should be paid to the design of the battery pack Jester manufacturer offers only silver and black, and those are stylized as carbon fiber. The rest of the design options are bright drawings on plastic, which will not leave indifferent any vaper, as it is a great opportunity to get a unique device.
The Jester battery pack is powered by a built-in 1000 mAh battery that charges via a standard micro-USB connector located on the bottom end with 1A current. It is worth mentioning that it takes an hour and a half to fully charge the battery.
An important feature of the device is that you can set the voltage supplied to the vaporizer or coil. There are three operating voltages of 3.3/3.8/4.8V. The device has a full set of protections – from low/high resistance, from overheating, from short circuit, from overcharge/overdischarge.
Cartridge, vaporizers, serviced base.
Naturally, the main feature of theVapefly Jester Rebuildable Pod system is the cartridge. It is worth to say right away that its capacity is 2 ml and it is refilled regardless of the design very simply by removing the top cap and opening the silicone plug, and you do not have to remove the cartridge completely.
The manufacturer abandoned the magnetic fasteners of the cartridge to the battery pack, giving preference to the mechanical latches located on the side edges of the device.
If a vaper chooses Jester Pod Meshed edition, he can use one of the two variants of replacement vaporizers 0,5 (on the grid) and 1,2 (on the standard coil) Ohm. And after installing these vaporizers you can adjust the draw, which is very convenient and practical.
When buying and using the Jester Pod DIY edition, the vaper gets an opportunity to use not only a cartridge with interchangeable vaporizers, but also a cartridge with a serviced base. The base in this variant will not surprise anyone standard two racks with a horizontal helix and fixation on top with screws (this base can be found in most cigarette shops). The recommended impedance of the self-installed coil is 0,8-1,2 Ohm, so you need to choose the right coil.
Wool packing will not cause questions for it there are big enough holes, in which it is not difficult to lay it, but it is important not to overdo everything, as on a standard MTL-tank.
Conclusions and impressions
It is safe to say that Vapefly Jester Rebuildable Pod system is a universal option, which will appeal to all fans of POD-systems. In addition to the fact that the process of replacing the vaporizer is simplified as much as possible, the vaper can install the coil he likes himself, while significantly saving on consumables and getting a very decent taste.
Advantages and disadvantages
Disadvantages
Small selection of vaporizers;
Lack of blow control when using the RBA base;
Only three operating voltages.
Advantages
Ergonomic case;
Original design;
The possibility of using interchangeable vaporizers;
Adjustment of blowing on removable vaporizers;
RBA base;
Easy maintenance and operation;
Good flavor transfer.
