Today we will look at an unusual box mod with replaceable side panels called Mechman from the Chinese company Rincoe.
Just the other day we got acquainted with a rather remarkable new product from the manufacturer Rincoe in the form of the Mechman 80W pipe mod and its complete tank of the same name. It should be noted that the device mentioned above is by no means the only one with a similar name in the assortment of the Rincoe company. So, relatively recently, a much more functional device was released – the Mechman box mod for two batteries with some at least interesting features. We will tell you more about it further in the text.
This is the first look at the mod, a detailed review of this device can be read here: Rincoe Mechman 228W Mod
The Mechman Kit 228W consists of a box mod and a maintenance-free tank, familiar from the previous “kit” from Rincoe. canadian vape shop edmonton As often happens, you can purchase either the entire set or, importantly, the mod separately. The latter is a fairly compact device in its dimensions, and also has good, according to the manufacturer, ergonomics.
The main feature of the Mechman box mod is the ability to customize the appearance of the device. A huge variety of replaceable side panels in three design variations, as well as stickers, will be available for the device. All this together will allow owners to achieve almost any (within reason, of course) exterior of their mod.
Two replaceable 18650 power elements are responsible for the operation of the Mechman Mod. Inside the box mod, a proprietary board from Rincoe is installed, endowed with all the necessary modern functionality. In addition to the standard vaping modes in the form of variable wattage and temperature control, there is also a mechanical mod mode (or bypass). The maximum output power of the new product is 228 watts, and the minimum supported resistance for VW and TC is 0.08 Ω and 0.05 Ω, respectively.
The diameter of the Mechman Tank whale tank can be called quite impressive – 28 mm. The materials used for the tank are stainless steel, epoxy resin (810 drip tip) and quartz glass. The tank works on a replaceable evaporator using a mesh. Two types of coils are available with one or two spirals inside, the resistance of which is 0.25 and 0.2 Ohm.
The tank can be filled in an elementary way – through the top slider cover, hiding one hole for pouring liquid with a silicone sealant to seal the entire structure. The maximum tank volume is 4.5 ml when using a “bubble flask”.
Technical characteristics of the Rincoe Mechman Kit 228W:
Mod dimensions: 53.8 mm * 29.2 mm * 90 mm
Maximum power: 228 W
Power supply: 2 * 18650
Operating modes: VW / BYPASS / TC (Ni, Ti, SS)
Supported resistance: 0.08 – 5.0 Ω (VW, BYPASS) / 0.05 – 3.5 Ω (TC)
Tank dimensions: 28 mm * 36 mm
Capacity: 4.5 ml
Drip types: 810
Evaporators: Single Mesh Coil 0.25 Ω, Dual Mesh Coil 0.2 Ω
