Every vaper who is more or less interested in new products on the vape market knows about the productivity of the Vandy Vape company, and has not been using its product for the fifth year, believing that it is it that helps to maximize the taste of the liquid, and not all these newfangled drips and DNA. Vandy Vape regularly introduces new products to vapers, paying attention to such a market segment as MTL devices. There are many examples of this: Berserker 1.5, Berserker MTL Kit, and Berserker RDA. But at the same time, the company’s developers are constantly working in this direction, so the company has released a new AP Kit “Vandy Vape” starter kit, among the features of which are simple controls, work on replaceable evaporators, a shock- and moisture-proof case. This starter kit will especially appeal to vapers who want to get the most easy-to-use device that they won’t have to worry about for everyday use.

General information

AP Kit” Vandy Vape starter kit, consisting of an AP Mod box mod with a built-in battery in a shock- and moisture-proof case and an MTL atomizer AP Tank on replaceable evaporators. AP Mod is easy to control and operate, allowing the vaper to change the power voltage supplied to the vaporizer within 3.2-4.2 Volts. Powered by a built-in 900 mAh battery. canadian vape shop calgary AP Tank is a new product from Vandy Vape, as it works on replaceable vaporizers of its own production. The company offers this starter kit in main black color with red, blue inserts , green, amber and dark gray in one word, there is plenty to choose from.

Equipment

It’s no secret that Vandy Vape always packages its devices very well, and the AP Kit is no exception, since in the branded box you can find:

Box mod AP mod;

AP MTL Sub tank atomizer with pre-installed 1.5 Ohm evaporator;

Spare evaporator 1.8 Ohm;

USB cable for charging;

User’s Manual;

Warranty card.

We can confidently say that after the vaper takes the device out of the box, assembles it, charges it and fills it with liquid, he will be able to use it to its fullest without any problems.

Box mod AP mod

Just look at the AP mod box mod and you get the impression that Vandy Vape either invited a new designer or brought in third-party specialists, since it is 100% different from the devices previously produced by the company. But at the same time, the device looks quite interesting, a little brutal and futuristic, which is good news for many vapers who will appreciate such a design. Moreover, the device is made not just in the form of a pipe, but with numerous edges, which is good news in terms of ergonomics.

AP mod is powered by a built-in 900 mAh battery, which is enough to operate the device in MTL mode. The declared maximum power of the device is 20 Watts, but it is changed not using a vari-watt, but a vari-volt, which is five-position and regulates the voltage within 3.2-4.0 Volts.

It’s worth saying right away that the AP mod is not equipped with a display; the operating voltage and battery charge level can be seen by two rows of LEDs. The voltage is controlled using the +/- buttons located under the LEDs.

The landing pad for the atomizer is 22 mm and is equipped with a 510 connector, so if desired, you can use other tanks or drips, but take into account the battery capacity.

An important point of such a device is that the case is made with protection from moisture (household water, you shouldn’t swim with it), impacts (it won’t withstand a hammer blow, but a fall on the asphalt will not be critical) and dust. Similar solutions have already been used by other manufacturers, but Vandy Vape began to use them for the first time.

Atomizer AP MTL Sub tank

The Vandy Vape company has always been famous for its serviceable atomizers, but recently it has also begun to produce models that operate on evaporators. AP MTL Sub tank works specifically on evaporators with a resistance of 1.5 and 1.8 ohms, and the evaporators are only branded and presented in only two versions.

AP MTL Sub tank is a classic representative of devices for tightly puffing cigarettes. Depending on the vaper’s preferences, one of six air intake holes with a diameter of 0.6 can be used; 0.8; 1.0; 1.5; 2.0 and 2.5 mm. Adjustment is made using a traditional ring located at the bottom of the tank. It is worth saying that the atomizer has a diameter of 22 mm and a 510 connector, so it can be used on any other box mod.

To refill the device, you simply unscrew the top cap and fill in the liquid. It is worth noting that the manufacturer specially placed a mark with a min mark inside the tank so that the vaper knows exactly when he needs to add liquid and does not catch the spark, preventing the evaporator from drying out.

Conclusions and impressions

We can confidently say that “AP Kit” Vandy Vape is quite an interesting starter kit, which is another successful experiment of the company regarding MTL devices. Due to the fact that the body of the box mod is shockproof and waterproof, you don’t have to worry about falling or floating in the rain , although the glass in the tank is standard, it can easily be broken (it would be more logical to use Ultem).

Advantages and disadvantages

Disadvantages

Low battery capacity;

The atomizer is not shockproof;

Small selection of evaporators.

Advantages

original design;

Shockproof and waterproof housing;

Simple control and display;

Using a 510 connector;

Easy maintenance of the atomizer;

A full, tight cigarette puff;

Light weight.