The number of submods and POD-systems is constantly growing, but a lot of vapers do not want to give up traditional tanks and box-mods. Naturally, now many lovers of delicious and fragrant vapor use non-serviced tanks, because it is easy to buy a vaporizer for any device and there are a lot of them on the market. But not every vaper knows which modern device he should buy, because their range is constantly growing. For such hesitant vapers company Vaporesso has developed (and to be honest, finalized the previously released device) quite interesting and versatile starter kit Vaporesso” GEN Fit 40 kit, which will pleasantly surprise even experienced vapers and skeptics.
General Data
Vaporesso” GEN Fit 40 kit is a compact starter kit consisting of box mod GEN Fit 40 mod, running on a powerful built-in battery and atomizer iTank X, designed to use vaporizers GTX series. The box mod looks very neat and even to some extent miniature, it is small, with rounded edges and excellent ergonomics. The device is equipped with a simple chipset, thanks to which the vaper will get at his disposal vari-watt power of 5-40 watts. The iTank X atomizer is also new, small and practical because it is designed to install GTX series vaporizers, and it has a bottom variation blowing, so it can be used for both MTL and RDL draws. You can buy the Vaporesso GEN Fit 40 kit in six colors black, gray, blue, rose gold, blue and pink.
Kit
It is worth paying tribute to the company Vaporesso, which decided to complete a new starter kit to the full program, so the vaper will be pleasantly surprised to find in the box:
GEN Fit 40 Mod box mod;
Atomizer iTank X;
GTX 1.2ohm REGULAR Coil;
GTX6ohm MESH Coil;
Replacement Glass;
Replacement Eringes;
USB Type-C cable;
Warranty card;
User’s Manual.
GEN Fit 40 Mod Box Mod
It is nice to realize the fact that Vaporesso Company not only produce the most popular today pod-mods and POD-systems, but also traditional devices, however, somewhat modified and adapted to modern realities. It is worth saying that the devices of this manufacturer are constantly in demand among vapers, as at a low cost you can buy high-quality and reliable devices. The company decided to please fans of stealth devices again and presented a fairly interesting and practical starter kit Vaporesso GEN Fit 40 kit.
Box mod Vaporesso GEN Fit 40 Mod is made in a small size and has excellent ergonomics due to the rounded body with no edges at all. The body is metal, with a pleasant to the touch soft-touch coating, so it does not slip, even if you take it with a wet hand. The device is really small 65.4 * 32.5 * 23.53 mm, and its weight is only 66 grams. The landing pad is designed for small atomizers with a diameter of 20 mm.
Boxmod is designed to work on the built-in battery capacity of 2000 mAh, and this for a device of such a compact size is quite a good indicator. The battery is charged via USB Type-C connector located on the side panel, 2A current.
An important feature of Vaporesso GEN Fit 40 Mod is that it has a fairly simple chipset, which allows the vaper to use it in varivatte mode with a capacity of 5-40 watts. It is interesting that a small monochrome display is located on the top end of the box mod (at once I remember devices that were popular about five years ago in them, too, often the display was located so), and the control buttons on the side panel. Such a decision is quite justified because of this arrangement you can not increase the size of the case.
iTank X Atomizer
Despite the fact that iTank X atomizer is quite a compact size with 20 mm seat diameter, it is quite a decent tank which will pleasantly surprise with its practicality and functionality. It uses a traditional 510 drip tip and has a classic 510 connector.
The iTank X atomizer is designed to use interchangeable vaporizers from GTX series with 0,3/0,4/0,6/0,8 ohm resistance on the grid and 1,2 ohm resistance on the standard coil. These vaporizers are well known to vapers as they are designed for good flavor delivery and bulk. At the base of the tank there is a blower adjustment ring, and the vaper can choose between a looser RDL draw and a fairly tight MTL draw.
To refill, you have to remove the top cap and pour the liquid into one of the two holes. The tank volume can be 2 ml or 3.5 ml depending on the installed glass.
Conclusions and impressions
Despite the fact that the Vaporesso GEN Fit 40 kit display layout suggests that everything new is well forgotten old, the starter kit came out pretty interesting and practical. Vaper, who decided to buy Vaporesso GEN Fit 40 kit, will get a compact, versatile starter kit, which also will please you with good taste.
Advantages and disadvantages
Disadvantages
The location of the display is not convenient, it can be poured;
When using 0.3/0.4 ohm vaporizers, the battery will run down very quickly.
Advantages
Compact size;
Ergonomic design;
High capacity battery;
Fast charging;
Simple and reliable chipset;
The ability to adjust the power;
Display;
510th drip tip;
510th connector;
GTX vaporizers on grid;
Blow control;
Easy refills.
