Today I’m going to tell you about a new drip from Cigreen, which is able to handle very high wattages without any problems thanks to its powerful blowing system. It’s called the Gear 25mm.
Gear 25mm by Cigreen
The appearance of the upper and lower parts of the case look like gears, and this is just very suitable for the device judging by the name (gear gear). On the main part of the case there is an engraving of the name of the drip and air holes. In general, it looks very nice and reminds Twisted messes RDA. The height of the drip is 50 mm, diameter is 25 mm and weight is 74 grams.
Very much stands out 12 mm delrin driptip, which hints at the fact that the flavor will not be much, but the vapor is a lot. But it’s not all bad, there is an adapter for 510 driptip in the kit.
Since the drip is designed for high power, the manufacturer did not invent a bicycle and stuck here Velocity base with holes 3×2.5 mm. canadian vape shop edmonton The depth of the well for liquid is 8mm, and with a diameter of 25mm this is a lot.
Gear 25mm by Cigreen
The blowing is bottom and definitely deserves attention. Air enters through perforated holes in the form of a triangle (there are 2×10 holes of 2 mm each) into the main holes of 9×3 mm, and exits right under the winding from the holes of 7×3 mm. This whole system is adjusted by turning the skirt to the side you want.
Gear 25mm by Cigreen
At the bottom of the case, in addition to the engravings, there is a steel 510 connector with an adjustable copper center contact.
Approximate price of the device is 40 dollars and it will be perfect for vaping on fat windings.
